EnglishChinese

National Advisory Hotline:
0577-88777958

Count controller

your locationhomeCount controller

JDM99-1

pk_hits:       date:2018-10-26

Five-bit high-brightness LED display, five-bit preset switch settings, with power-off memory, counting signal photoelectric isolation, strong anti-interference, accurate counting, durable. By changing the connection between terminals 6 and 8, different counting methods can be selected. When connecting terminals 6 and 8, counting to the set value, relay action, counting value is not zero, continue to count; when disconnecting terminals 6 and 8, counting to the set value, relay action, counting value zero, re-counting. There is DC 12V DC power supply output at random for sensor use. It can match photoelectric switch, proximity switch, magnetic switch, solid-state components and various relays and switch contacts.

Main technical parameters:

Counting range: 0-99999

Count mode: add count

Counting frequency: 20 times per second.

Display: 0.5 "high brightness LED

Counting input: switch signal

Output power: DC12V

Output contacts: a group of normally open normally closed.

Contact capacity: AC240V 3A resistive load

Delay range: 0-9 seconds.

Battery life: over three years.

Pull in delay: 0~9 sec adjustable

Previous:JDMS-98A
Next:JDM99-1X

Related Products

Tenglong Electronic Instrument

Monday to Friday8:0-18:00 Contact information